







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Glendora, CA: What the Job Actually Involves
Paver driveways in Glendora typically run $7,000 – $18,000 and take three to five working days from demo to final joint sand, depending on square footage, base depth and how much of the old surface has to come out. The work is a full rebuild, not a resurfacing: excavation, compacted aggregate base, edge restraint, then the pavers themselves set on a screeded sand bed. Call (844) 662-2335 for a free on-site estimate and a written line-item quote.
Day by Day: How We Build a Paver Driveway in Glendora
A paver driveway is mostly base work. The pavers are the last 10% of the job and the part everyone photographs; the 90% underneath is what decides whether it still sits flat after ten summers. Here’s the sequence we run, and where you make decisions.
- Day 1: layout, demo and haul-off. We mark the new driveway against the garage door, the sidewalk and the property line, then break out and haul away the existing concrete, asphalt or gravel. On a typical two-car Glendora apron this is one long day, and it’s the loud one. You decide here whether the driveway footprint stays exactly as-is or gains a widened apron or a third-car pad.
- Day 2: excavation and base. We cut down 6 – 10 inches below finished grade, depending on subgrade and whether the driveway takes a heavy vehicle, then lay and compact class II aggregate base in lifts. Foothill lots in 91741 often need a deeper section than a flat lot near downtown. You confirm drainage direction here: where runoff leaves the driveway matters, and it’s a decision, not an afterthought.
- Day 3: edge restraint and bedding sand. We set the soldier course or border, pin the edge restraint into the base so the field can’t spread, and screed the bedding sand to consistent depth. Inspection of base compaction happens before anything covers it. You pick the border style at this stage if you haven’t already.
- Day 4 (sometimes into Day 5): setting pavers. The field goes down in the pattern you selected, cut with a wet saw at the edges and around any radius. A straightforward running bond in a 400-square-foot apron is a one-day set; herringbone with a contrasting border on 900 square feet pushes into a second day. You watch the pattern take shape and can still catch a layout concern before the joint sand goes in.
- Day 5: compaction, joint sand and cleanup. Plate compaction over the finished field, polymeric joint sand swept and set, final rinse and haul-off. We walk the finished surface with you, check the slope at the garage threshold, and leave the driveway traffic-ready immediately for foot traffic, with vehicles after the joint sand cures.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Nobody picks pavers by color alone, even though color is what the conversation starts with. These are the choices that actually change cost and performance.
- Concrete pavers vs. clay brick. Concrete pavers are the standard choice at this price point and come in more sizes and finishes. Clay brick runs meaningfully higher per square foot and suits a period home’s look. On a 1920s – 1960s ranch near downtown Glendora, brick reads as original; on a 1980s foothill custom, it can look pasted on.
- Base thickness. Six inches of compacted base works for a standard passenger-vehicle driveway. Anywhere a truck, RV or trailer parks, we go eight to ten inches. It’s the least visible upgrade and the one that prevents rutting.
- Pattern: running bond, herringbone or basketweave. Running bond is the fastest to set and the least expensive. Herringbone locks together better under turning tires at the street apron. Basketweave suits a formal front elevation.
- Border and soldier course. A contrasting border adds material and labor but visually anchors the driveway and helps hold the field. Skip it and the driveway still works; add it and the entry looks finished.
- Permeable vs. standard joint sand. Standard polymeric sand is the default. Permeable joints and an open-graded base cost more and move water through the surface rather than off it, which earns its keep on lots with tight drainage.
- Sealer, later. A penetrating sealer locks in color and slows staining, and Belgard makes products designed to pair with their pavers. We quote it as a separate line so you can decide after seeing the finished driveway.
What Paver Driveways Cost in Glendora, CA

Plan on $7,000 – $18,000 for a full paver driveway installation in Glendora. That range covers a standard two-car apron at the low end and a larger, bordered, deeper-base driveway on a sloped foothill lot at the high end. Below is how each variable moves the number.
- Square footage. A 300-square-foot driveway lands near the bottom of the range; 800 square feet or more with a widened apron moves toward the top.
- Existing surface and haul-off. Breaking and hauling concrete or asphalt adds cost. A clean gravel or dirt removal is cheaper.
- Grade and drainage. Flat lots are straightforward. A steep foothill grade requiring excavation, a retaining edge or a drainage channel pushes the job higher.
- Paver grade and pattern. Premium pavers, clay brick and labor-intensive patterns like herringbone all add. Standard running bond with concrete pavers keeps it lean.
- Permits and inspections. Some driveways in Glendora require a permit, and that adds cost and time. We pull permits and pass inspections as part of the job.
Every written estimate is line-item: pavers, base, edge restraint, joint sand, labor, haul-off and permits, each priced. If you’re building the driveway as part of a larger front-yard project, the scope overlaps with our Driveway & Pavers in Glendora work, and we can combine the pricing.
See the difference
Before
After
Before
After
Before
AfterWhat Glendora Homes Specifically Do to This Job
Glendora splits the paver driveway problem in two. The flat, older core around downtown (91740) is 1920s – 1960s ranch homes and bungalows, where driveways are short, flat and often boxed in by mature trees with roots pushing up the old concrete. Base prep there is about root control and drainage toward the street. Climb into the foothills above Sierra Madre Avenue (91741) and it’s a different job: 1970s – 1990s custom homes on sloped lots, where the driveway is a graded ramp with canyon runoff crossing it in winter. Expansive native soil and seasonal Santa Ana winds mean edge restraint and base compaction matter more than anywhere on the valley floor. Winter rain also makes hillside erosion control a real part of the design. If you’re also updating the entry that frames the driveway, homeowners often pair this with Door Installation in Glendora.
Serving Glendora, CA – Our Local Coverage Area
We serve Glendora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Glendora

Most paver driveways in Glendora take three to five working days. A standard flat two-car apron near downtown finishes on the short end; a larger bordered driveway on a sloped foothill lot runs to five days or more.
Sometimes, depending on the driveway’s size, grade and how it connects to the street and drainage. Some driveways require a permit and inspection; others don’t. We confirm what applies at the estimate and pull the permits and pass the inspections.
Yes, in almost every case. A paver driveway is a surface job and doesn’t disturb the house. The exception is a drainage line, a utility box or a gas meter sitting in the driveway path, which may need to be relocated by a licensed trade before pavers go down.
No. The number you see is the number you pay, on a written line-item estimate. If we discover something the estimate couldn’t see, like a buried utility or unexpected subgrade, we stop and show you the change before any extra work.
Every paver driveway we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it isn’t done right, we make it right.
Get Your Free Paver Driveway Estimate in Glendora
Call (844) 662-2335 to schedule a free on-site estimate for paver driveways in Glendora. We measure the driveway, check the existing surface and grade, walk you through paver choices, and leave you with a written line-item quote that day. A live person answers, 24/7, and estimates are free. When the job’s part of a wider project, ask about our Driveway & Pavers service and our Glendora coverage. Homeowners often pair this with Cabinets & Countertops in Glendora when refreshing the entry.
Written by the team at Groundwork Construction Co.












