







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Walnut, CA: What It Costs and How Long It Takes
New concrete work in Walnut runs $4,500 – $12,000 for a standard driveway pour and $5,000 – $14,000 when the old slab has to come out and be replaced. Most driveways take 2 – 4 working days on site, but the concrete then needs 5 – 7 days before you park on it. Call (844) 662-2335 and we’ll walk your lot, check the grade, and put a line-item number in writing.
How we pour a driveway in Walnut, step by step

Concrete work is won or lost in the prep, and the prep is where most homeowners are surprised by how much time gets spent before a single yard of concrete shows up. Here’s the sequence we follow on a Walnut driveway.
Stage 1: Walkthrough and layout (day 1, about an hour). We measure the apron, the parking depth, and the turn radius into the garage. You decide the driveway width (a single-car apron is typically 10 – 12 feet, a double 16 – 20 feet) and where expansion joints land. On hillside lots we check the slope out to the street because drainage direction gets decided here, not later.
Stage 2: Demo and haul-off (day 1, 4 – 8 hours). An existing slab gets broken out with a jackhammer and skid-steer, loaded, and hauled to a recycler. A 400-square-foot driveway produces roughly 5 – 7 tons of debris. If there’s old asphalt underneath or a failed sub-base, that comes out too. You approve the haul-off cost in the estimate so it isn’t a surprise line item later.
Stage 3: Grading, forms and rebar (day 2, full day). We cut and compact the sub-grade to the right slope, set steel forms, and tie #3 or #4 rebar on a grid. On Walnut’s clay-heavy soils we over-excavate and bring in base rock when the native dirt won’t compact. This is the stage where you’ll see the shape of the finished driveway in the forms, and it’s your last easy chance to change a dimension.
Stage 4: Pour and finish (day 3, 3 – 5 hours plus finishing). Concrete arrives by truck, gets placed, screeded, and floated. You pick the finish: broom for traction, a light salt texture, or saw-cut joints in a pattern. We control the mix to the weather, which matters in Walnut’s summer heat, and we cover or mist the slab if the forecast pushes past the mid-90s.
Stage 5: Cure and joint sealing (days 3 – 10). The slab cures under a cure-and-seal compound, with control joints cut within 12 – 24 hours to direct cracking where it belongs. You stay off it for 5 – 7 days and keep heavy vehicles off for about 10. We come back after the cure window for a final look at joints and edges.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a Walnut pour
Concrete isn’t one product. These are the decisions that actually change what your driveway costs and how it looks ten years out.
- Standard broom finish vs. exposed aggregate: Broom is the value pick and grips well. Exposed aggregate looks richer and hides tire marks, but costs noticeably more per square foot and is harder to sweep.
- Plain gray vs. integral color: Integral color runs through the whole slab so chips don’t show. Surface stains fade and wear at the apron. Colored concrete adds to the job but holds up well under Walnut sun.
- 4-inch slab vs. 5 – 6-inch slab: Standard residential is 4 inches. If you park a heavy truck or an RV, or you have a steep grade, a thicker slab with more steel is the honest call. It costs more now and saves a crack-out later.
- Rebar vs. welded wire mesh: Rebar on a grid is the stronger, more consistent choice for driveways. Mesh is cheaper and works on light-duty paths, but it can ride up during the pour if it’s not chaired properly.
- Joints: saw-cut vs. hand-tooled: Saw-cut control joints are cleaner and more predictable. Tooled joints suit smaller pours and tighter budgets.
- Slope and drainage: A crown or cross-slope directing water to the street or a dry well. On a Puente Hills-edge lot this can mean a small retaining edge or a channel drain, which is quoted separately.
If the driveway is part of a bigger front-yard rebuild, it often makes sense to plan the whole thing at once. Homeowners regularly pair this with Driveway & Pavers in Walnut when they want to compare concrete against pavers side by side, and with ADU Site Prep & Utilities in Walnut when a new unit will need its own approach and utility trenching.
What Concrete Driveways & Concrete Work costs in Walnut, CA

Concrete driveway installation in Walnut runs $4,500 – $12,000. A replacement, where the old slab comes out first, runs $5,000 – $14,000. Those are installed numbers with materials, labor, haul-off and cleanup, quoted upfront in writing before we start.
Five things push a job toward the low or high end:
- Square footage and depth: A two-car driveway roughly doubles the concrete and steel of a single apron.
- Demo and haul-off: Breaking out and disposing of an old slab can add a few thousand dollars on its own.
- Site access and grade: A tight side yard or a steep hillside pull means smaller equipment and more hand work.
- Sub-grade condition: Soft or clay-heavy soil that needs over-excavation and imported base rock adds cost.
- Finish and color: Broom gray is the baseline; exposed aggregate or integral color moves the number up.
Every written estimate we hand you is itemized: cubic yards of concrete, rebar, base rock, forms, demo, haul-off, permits if required, and finishing. What’s usually not included is drainage work like a channel drain or dry well, retaining walls, and any gate or fence reset that demo disturbs. We flag those separately rather than lumping them in. Upfront pricing means the number you see is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Walnut homes specifically do to this job
Walnut’s housing stock sets the terms here. Most of these are single-family homes built from the 1960s through the 1990s on generous lots, with a mix of ranch-style and two-story Mediterranean-influenced customs plus newer infill. That means plenty of original driveways now 30 to 60 years old, many with the shallow slabs and thin steel of their era. We see them cracked at the apron from tree roots, settled where a downspout has been dumping water at the same spot for decades, and heaved along the garage threshold.
The northern edge near the Puente Hills adds a wrinkle a flat-lot city never sees. Lot-line-to-hillside properties make grading, drainage slope, and sometimes a retaining edge part of the concrete scope, and the City of Walnut’s own building department reviews the plans rather than a big-county process. If your driveway ties into a hillside approach, expect the permit to require a grading detail. The hot, dry inland San Gabriel Valley summer also affects the pour itself: concrete placed in that heat needs to be kept from curing too fast or it surface-cracks, so we schedule pours for morning and control the mix. Rare winter rain events mean we protect fresh slabs and check the drainage path before we pour.
Across the 91789, 91788 and 91795 ZIP codes we cover, from the hillside-edge streets down to the flatter interior, the same failure modes keep showing up. Our Driveway & Pavers service covers the wider front-yard work if concrete turns out to be only part of your project. New garage doors often get set at the same time the apron is repoured, so many homeowners pair this with Door Installation in Walnut.
Serving Walnut, CA – Our Local Coverage Area
We serve Walnut and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Walnut

Plan on 2 – 4 working days on site for prep and pour, then 5 – 7 days before you drive on it. A simple single-car apron can pour in one day; a full replacement on a large lot with demo and grade work stretches toward four. Call (844) 662-2335 for a timeline specific to your driveway.
It depends on the scope. A like-for-like driveway pour usually doesn’t need one, but a hillside property with grading, a retaining edge, or a change to how water leaves the lot often triggers a City of Walnut building department review. We’ll tell you in the estimate whether your job needs a permit and handle the paperwork. Estimates are free.
Usually, yes. A driveway pour is a surface job, and we don’t touch plumbing or framing unless your project includes a new approach, a utility trench, or an ADU pad, in which case those get quoted as separate line items. If a sewer line runs under the slab, we mark it before demo. Call (844) 662-2335 and we’ll check your lot.
Concrete driveway installation is $4,500 – $12,000 and replacement is $5,000 – $14,000. That usually lands below a paver driveway, which runs higher material and labor, and above a basic asphalt pour, which costs less but needs sealing and resurfacing sooner. We’ll price both on the same visit if you want to compare.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That covers workmanship, and we’ll spell out what it does and doesn’t include in writing before you sign. Call (844) 662-2335 for the details.
Get a free concrete estimate in Walnut
Call (844) 662-2335 for a free on-site estimate on Concrete Driveways & Concrete Work in Walnut. A live person answers around the clock, and we’ll schedule a walkthrough, measure your lot, check the grade, and hand you a written line-item quote with no pressure and no hidden extras. Background-checked, uniformed technicians, upfront pricing, and the 730-Day Done Right Promise behind every pour.
Written by the team at Groundwork Construction Co.












