







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in San Dimas: What It Costs and How Long It Takes
A chain link fence in San Dimas usually runs $3,500 – $9,000 for a typical residential lot, and most jobs are finished in 2 – 3 working days once the crew is on site. That range covers galvanized or vinyl-coated mesh, posts set in concrete, gates, and haul-away. Call (844) 662-2335 and we’ll set a free on-site estimate. The number you see is the number you pay, and every job carries our 730-Day Done Right Promise.
How We Install a Chain Link Fence, Stage by Stage

Chain link is one of the most predictable fences you can buy, but the steps still matter. Here’s what actually happens on a San Dimas job.
1. Call 811 and the on-site walkthrough (day 1, about an hour)
Before anyone touches a shovel, the utility locate gets called in, and that usually takes a couple of business days to clear. On the walkthrough, we mark the property line with you, agree on gate placement, and confirm the height and coating. You’ll decide right there whether you want 4 ft, 5 ft, or 6 ft, and whether the terminal posts sit at corners only or every 10 ft for a heavier feel. Anything unusual – a slope, a tree root, a footer to avoid – gets flagged now, not after the concrete sets.
2. Layout and corner post setting (day 2, half a day)
We string the line, set the corner, terminal, and gate posts in concrete, and plumb each one. If your yard has a slope change (common on the foothill streets here), we’ll step the fence in sections rather than racking the whole run on an angle. That decision happens on day 2, and it’s the one that most affects how the finished fence looks.
3. Waiting on concrete, then line posts and top rail (day 2 into day 3)
Concrete needs its cure time, so most of the post work happens on one day and the mesh hangs the next. Line posts get driven or set, the top rail goes in, and we attach the tension bands and brace bands. This is where a sloppy crew shows itself: a fence that leans or sags a month later almost always traces back to line posts set shallow or shortcuts on the brace.
4. Mesh, gates, and tensioning (day 3, most of the day)
The chain link fabric gets unrolled, stretched with a come-along, and tied off at each post with the right ties. Gates get hung, checked for swing, and the latch and hinges get tested twice. You’ll walk the fence line with us and confirm the tension and gate clearance before we call it done.
5. Final walk and cleanup (day 3, last hour)
We pull the stakes, haul off the concrete bags and packaging, and leave you the manufacturer’s warranty paperwork. If a stretch of mesh has a bad kink from shipping or a gate does not close clean, we fix it before we ask for your sign-off. The 730-Day Done Right Promise covers workmanship for two full years – if a post settles or a gate starts dragging, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Choose Between
Chain link is a small set of real choices. The whole job is basically one of these plus a height decision:
- Galvanized vs. vinyl-coated. Standard galvanized is the leanest option and the most common in San Dimas. Vinyl-coated (usually black or green) adds roughly 20 – 30% to the material line but looks quieter in a landscape and holds up better against sun fading – worth it on a front yard where a black chain link reads as almost invisible against a shrub row.
- Height: 4 ft, 5 ft, or 6 ft. A 4 ft fence is the cheapest and is common for lot-line marking. A 6 ft run is the standard for a yard where you want to keep a dog in or a deer out of the planting beds. Every foot of height adds material, post gauge, and wind load, so budget for the taller option.
- Post gauge and top rail. A heavier gauge post (often 16 or 14 gauge) and a larger top rail cost more up front but put up a far stiffer fence. On the windy foothill streets above downtown, that stiffness matters.
- Mesh weave. Standard 2 in. diamond is the default. A 2 in. x 1 in. “knuckle” mesh or a smaller 1 1/4 in. weave runs a bit more but reads tighter and adds a touch more privacy and stiffness.
- Gates. A single walk gate is standard. A double-drive or a sliding gate is a separate line item and a separate decision – and it’s exactly the kind of thing homeowners often pair this job with on a full Fence Installation in San Dimas plan.
- Tension wire and bottom rail. A bottom tension wire keeps the mesh tight to the ground. A bottom rail is the upgrade – it stops the base from bowing when a dog pushes it and it looks cleaner.
What Chain Link Fence Costs in San Dimas, CA

Most San Dimas chain link fence jobs land between $3,500 and $9,000. Here’s what pushes a job toward one end or the other:
| Line item | Typical range |
|---|---|
| Standard galvanized, 4 – 5 ft, typical lot | $3,500 – $5,500 |
| Vinyl-coated, 6 ft with gates | $5,500 – $9,000 |
| Slope work, retaining or stepped sections | add $400 – $1,200 |
| Extra gates (drive or walk) | $350 – $900 each |
The four variables that move the number:
- Linear footage and fence height. More feet, taller fence, more material and more posts.
- Site conditions. A flat valley-floor lot is the cheapest. A slope that needs stepping, a tree root that needs a short bypass, or rocky soil that needs hand-digging all add labor. Foothill lots above downtown are the most common reason a San Dimas job lands at the high end.
- Coating and gauge. Vinyl coating and heavier post gauge are the biggest material choices.
- Gates. Each gate is its own set of posts, hinges, and hardware.
Your written estimate itemizes each of these. If we hit a surprise during install – a buried footer, a utility line the locate missed – we stop and tell you before we do anything that changes the price. No change orders on the fly.
See the difference
Before
After
Before
After
Before
AfterWhat San Dimas Homes Specifically Do to This Job
San Dimas sits at the mouth of the San Gabriel Valley, where the foothills meet the alluvial fan below the mountains, so chain link fence work here is dominated by slope and grade rather than flat-lot runs. On the foothill streets above downtown, we regularly see a lot where the back property line climbs 6 – 10 ft over the run – the fence has to step in sections, and that is the single most common reason a San Dimas job costs $4,500 instead of $3,500. The decomposed granite slopes above downtown also saturate in winter rains, and a post set on those hillside grades needs a deeper footer than one on the valley floor. Farther down, mid-century and 1960s – 80s single-family homes on the flatter ground tend to sit on lots where an existing chain link is original, with posts that have rusted through at the ground line. We also see Santa Ana wind events push on a tall run, which is why post gauge and top rail matter here more than in a sheltered basin. Permits: a standard residential chain link fence on a private lot typically does not require a building permit, but a fence along a slope or retaining wall can trigger the city’s grading review, and your HOA may have its own height and material rules. We check the lot line and any recorded easements as part of the estimate.
San Dimas is one ZIP – 91773 – and we cover it, plus neighboring Charter Oak, La Verne, and Pomona, through our San Dimas service area. If the fence is part of a larger project, homeowners often pair this with a Door Installation in San Dimas on a gate-side entry, or an ADU Site Prep & Utilities in San Dimas job where a new backyard structure changes the fence line entirely. Our Fence Installation service line covers the wider work if you want to see how the pieces fit together.
Serving San Dimas, CA – Our Local Coverage Area
We serve San Dimas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in San Dimas

Most residential jobs take 2 – 3 working days once we’re on site, with the 811 utility locate adding a couple of business days before we start. Slope work or extra gates can stretch it to 4 days. Call (844) 662-2335 for an exact timeline based on your lot.
Usually not for a standard residential chain link under the city’s typical height limits, but a fence tied to a grading or retaining wall, or one on a slope, can trigger review. We check lot lines and any recorded easements on the estimate visit and tell you what applies to your property. Call us and we’ll walk it through.
Yes – chain link is the least expensive fence per linear foot in San Dimas, generally running $3,500 – $9,000 for a typical lot versus the $4,000 – $10,000 you’d see for aluminum. It’s not the most private option, but it’s the most durable per dollar, and a 6 ft vinyl-coated run looks far better than the bare galvanized fence most people picture. Call (844) 662-2335 for a free estimate.
In most cases, yes. We set posts in concrete footings and hand-dig rather than trench, so grass and shrubs along the line stay put. On a slope or a tight lot we may need to clear a path, and we’ll flag that on the estimate. Call us to schedule a free walkthrough.
Every install is backed by our 730-Day Done Right Promise – two full years on workmanship, on top of the manufacturer’s warranty on the mesh, posts, and hardware. If a post settles or a gate sags, we come back and fix it. Call (844) 662-2335 for the details.
Get a Free Chain Link Fence Estimate in San Dimas
Call (844) 662-2335 for a free on-site estimate on a chain link fence in San Dimas. We walk the line with you, check the lot and any easements, and hand you a written line-item quote – no pressure, no surprises. Phones are answered by a live person 24/7, and background-checked, uniformed technicians do the work. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of West Covina.












