







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Diamond Bar, CA: What the Job Actually Costs and How Long It Takes
Cabinets & countertops in Diamond Bar typically run $14,000 to $45,000 for a full kitchen’s worth, with cabinet installation at $4,000 – $13,000, countertop installation at $2,000 – $6,500, and a new island at $3,000 – $10,000. A standard cabinet-and-counter swap takes three to five weeks from demo to final caulk, and most of that is waiting on fabrication, not building. Call (844) 662-2335 for a free on-site estimate and a line-item quote you can hold us to.
How the job runs, from first measurement to final seam

Cabinet and countertop work has a rhythm, and once you know it, the schedule stops feeling like a black box. Here’s what actually happens, stage by stage.
Stage 1: Measure and layout (day 1)
We template the room, check the walls for plumb and square, and confirm appliance sizes so the cabinet boxes and the fridge, range, and dishwasher actually fit. This is where you lock your layout: sink position, drawer banks, whether the island stays where it is. On raised-foundation homes in Diamond Bar, we also look at what’s under the floor before committing to a sink or island location, because moving a drain is the single biggest schedule surprise in this job.
Stage 2: Demo and prep (days 2 – 4)
Old cabinets and counters come out, and the walls get patched, leveled, and prepped for the new boxes. If we’re relocating a sink or adding a circuit for a new range hood, this is when the rough plumbing and electrical happen, and this is when an inspection gets scheduled if the scope needs one. Two to three working days is typical for a standard kitchen.
Stage 3: Cabinet install (days 5 – 7)
Base and wall cabinets go in, get shimmed level, and get fastened to studs. Crown, filler, and toe kick follow. You’ll want to be reachable this week for one decision: handle and hardware placement, since that’s drilled after the boxes are set. Mid-range cabinets are usually in stock or a two-week lead; semi-custom runs four to six weeks, which is why ordering happens at contract, not at demo.
Stage 4: Template and fabrication (days 8 – 18)
Once cabinets are set, we template the countertops for a precise fit. Fabrication is the long pole: quartz and granite typically come back in seven to ten working days, and solid surface or butcher block can be faster. You’ll pick the edge profile and confirm the sink cutout during this window.
Stage 5: Counter install and finish (days 19 – 21)
Countertops are set, seams are color-matched, the sink and faucet go in, and the whole job gets a final walkthrough with you. That walkthrough is where we photo-document everything against the 730-Day Done Right Promise, so if a door hinge or a seam ever gives you trouble, we have the record and we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of your decisions live in two lists: what the cabinets are made of and how they’re finished, and what the countertop is. Here’s the honest trade-off on each.
- Stock cabinets (particleboard box, thermofoil or laminate door): the least expensive path and fine for a rental or a flip. They don’t love Diamond Bar’s dry inland summers; thermofoil can peel at the edges after several years of heat cycling.
- Semi-custom plywood-box cabinets with a painted or stained door: the sweet spot for most homeowners here. Real wood boxes hold up to seasonal movement, you get drawer organization and soft-close as standard, and KraftMaid is the line we lean on when the customer wants a known brand behind the finish.
- Full-custom cabinetry: built to the inch, priced accordingly, and worth it on hillside homes with odd wall angles where every inch of a galley counts.
- Quartz: the default for a reason. Non-porous, no sealing, and Cambria and similar lines come in slabs wide enough to minimize seams. It doesn’t love a hot pan, so use a trivet.
- Granite: natural variation, heat-tolerant, and it needs periodic sealing. Great for a homeowner who likes the look of stone that’s genuinely different slab to slab.
- Butcher block or solid surface: warm and repairable, less expensive than stone, and softer under a dropped glass. Solid surface can be sanded and re-polished in place, which matters in a busy house.
What Cabinets & Countertops costs in Diamond Bar, CA

The realistic number for the whole package is $14,000 – $45,000, and the spread comes down to five variables. Here’s what moves you to the low or high end:
- Kitchen size and cabinet count: a 10-foot galley with 12 boxes lands near the bottom; a 300-square-foot kitchen with an island and a pantry wall climbs fast. Cabinet installation alone is $4,000 – $13,000 depending on run length.
- Countertop material and square footage: countertop installation is $2,000 – $6,500, with quartz and natural stone at the top and laminate or solid surface at the bottom. An island adds $3,000 – $10,000 if you’re adding one.
- Relocating plumbing or electrical: moving a sink, adding a dedicated circuit, or shifting a gas line to a new range position is where budgets move. Keep the sink where it is and you save real money.
- Structural changes: taking out a wall or widening an opening means a beam and often a plan review. This is the single most expensive “while we’re in there.”
- Permit scope: a straight cabinet and counter swap with no plumbing or electrical relocation usually doesn’t trigger a permit. Anything that moves a drain, adds a circuit, or alters structure does, and that review adds both time and cost.
A written estimate from us covers demo, disposal, cabinet and counter materials, installation labor, and final walkthrough. It doesn’t cover appliance purchases, unexpected drywall or subfloor repair found behind the old cabinets, or the cost of a structural beam if you decide mid-project to open a wall. We’d rather tell you that upfront than hand you a change order in week three.
See the difference
Before
After
Before
After
Before
AfterWhat Diamond Bar homes specifically do to this job
Diamond Bar is a master-planned hillside suburb built out mostly between the 1960s and 1990s, so almost every kitchen here is a hillside kitchen, not a flat-lot tract kitchen. The 1960s and ’70s ranch and Mediterranean homes in the planned tracts often sit on raised post-and-pier foundations, and when we pull old cabinets in those homes we regularly find underslab plumbing and drainage problems that only surface after a heavy winter storm. That matters for cabinets and counters because the sink base is exactly where those issues hide, so we check before we order anything.
Hillside geometry also shapes the layout. Older homes on the sloped streets near the western hills and Tonner Canyon were framed with wall angles that are rarely square, which is why full-custom cabinetry sometimes earns its keep here where it wouldn’t in a newer build. And the hot, dry summers with Santa Ana wind events dry out wood door frames and can shrink gaps over time, so we spec doors and hardware that tolerate seasonal movement.
Newer infill near the Grand Avenue corridor and the Diamond Bar Golf Course brings a different problem: builder-grade cabinets and laminate counters installed fast and finished cheap, often still inside their builder warranty window. If you’re in one of those homes, this is the year to replace the face-frame boxes, not just paint them.
Serving Diamond Bar, CA – Our Local Coverage Area
We serve Diamond Bar and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Diamond Bar

Three to five weeks is typical for a standard kitchen, with cabinets in during week one and countertops fabricated and installed in weeks two and three. The wait is almost always the stone fabrication lead time, not the install. Call (844) 662-2335 for a schedule based on your actual cabinet line.
Often no, if you’re replacing in place and not moving plumbing, gas, or electrical. A permit becomes necessary when you relocate a sink drain, add a circuit, or alter structure, and the City of Diamond Bar review adds time. We’ll tell you at estimate which side of that line your job falls on.
Yes, and it’s the most cost-effective version of the job. Keeping the sink, range, and dishwasher where they sit means no drain relocation, no new circuits, and no permit, which keeps you in the lower half of the $14,000 – $45,000 range. Call (844) 662-2335 to price a same-layout swap.
The full package runs $14,000 – $45,000, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 as the two main line items. Size, material grade, and whether you move plumbing are what push you low or high. Call (844) 662-2335 for an exact quote; estimates are free.
Every cabinets & countertops project we do is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and fix it. That guarantee holds on a small counter swap the same as on a full build-out.
Get a free cabinets & countertops estimate in Diamond Bar
A free on-site estimate starts with a quick call to (844) 662-2335, answered by a live person around the clock. We’ll walk the kitchen with you, measure, talk through cabinet and counter options, and leave you with a written line-item quote and a real timeline. If the job grows into a wider scope, we also handle Kitchen Remodeling in Diamond Bar, and homeowners often pair cabinet work with a New Detached ADU in Diamond Bar or a Garage Conversion ADU in Diamond Bar when they’re planning a bigger change. Our Kitchen Remodeling team covers the whole Diamond Bar area.
Written by the team at Groundwork Construction Co.












