







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Valinda: Answer First
Paver driveways in Valinda typically run $7,000 to $18,000 for a standard two-car apron and run 4 to 7 working days from demolition to the final joint sand. The number hinges on square footage, base depth, and whether the existing slab or soil has to be re-engineered. Call (844) 662-2335 and we’ll walk your property, measure the actual pour area, and put the range in writing.
How a Paver Driveway Goes In, Stage by Stage

Every driveway we build follows the same sequence, and knowing it up front keeps surprises off the final invoice. Here is what actually happens from the first morning to the last sweep.
Stage 1: Layout and demolition (day 1)
We mark the finished grade, set the slope so water runs to the street instead of your garage door, and cut out the old surface. If there’s an existing concrete slab, breaking and hauling it usually takes a full day on its own. You’ll confirm the driveway width and apron flare before we cut, because changing it later means redoing base work.
Stage 2: Excavation and base prep (day 1 into day 2)
Pavers are only as good as what sits under them. We excavate 6 to 9 inches, depending on whether the driveway sees a single sedan or a loaded work truck, then compact the subgrade in lifts. On the clay-heavy soils common across the San Gabriel Valley, this is where the job earns its longevity. Paver driveways that fail early almost always fail here, not at the surface.
Stage 3: Base and edge restraint (day 2)
We lay and compact the aggregate base in 2-inch lifts, check it with a straightedge, then set the edge restraint in concrete. That hidden border is what stops the field from spreading under load. You’ll decide the border style now if you’re adding a contrasting soldier course, since the restraint is poured around it.
Stage 4: Setting the pavers (days 3 and 4)
Field pavers go down on a screeded bedding layer, cut edges are trimmed with a wet saw, and the pattern gets locked in. A typical two-car driveway moves fast, while a long RV pad or a complex herringbone with multiple borders will stretch to a third day. This is the stage where the driveway starts looking like the picture you approved.
Stage 5: Joint sand and cleanup (day 4 or 5)
We sweep polymeric or washed joint sand into the gaps, compact the whole field again, and blow the site clean. Polymeric sand is the better call in Valinda’s dry summer heat because it resists washout during the first winter rain. Walk-through happens the same afternoon, with the written warranty handed over before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on a paver driveway come down to four questions, and each one has an honest trade-off.
- Concrete pavers vs. clay brick. Interlocking concrete pavers are the workhorse choice: durable, colorfast, and easy to match later. Clay brick costs more but holds color for decades and suits the older mid-century homes here. Both beat a poured slab for repairability.
- Base depth. A 4-inch base suits a passenger car; 6 to 9 inches is right for trucks, RVs, or a driveway that doubles as a basketball court. Going shallow saves money and costs you in settling three years later.
- Pattern. Running bond is the cheapest and cleanest; herringbone locks tighter under tire load and adds roughly 10 to 15 percent to labor. A basketweave reads more formal and works on wider aprons.
- Color and border. A single-color field with a contrasting soldier course is the classic look and rarely goes wrong. Full-color blends hide tire marks better but cost a bit more per square foot.
We primarily source from Belgard for pavers, and where a homeowner wants a modular hardscape look coordinated with a rear addition, prefab partners like Mighty Buildings and Boxabl can tie into an ADU plan on the same lot.
What Paver Driveways Cost in Valinda, CA

For Valinda, paver driveways land between $7,000 and $18,000 for a standard residential apron. Below is how the number moves, and what sits inside a written estimate versus outside it.
| Line item | Typical range |
|---|---|
| Two-car paver driveway (approx. 400-500 sq ft) | $7,000 – $12,000 |
| Long driveway or RV pad (600-800 sq ft) | $12,000 – $18,000 |
| Demolition and haul-off of old slab | $800 – $2,000 |
| Base excavation and aggregate | $1,200 – $3,000 |
| Border / soldier course upgrade | $400 – $1,200 |
What pushes the price up or down
- Square footage. The single biggest lever. A narrow single-car cutout costs a fraction of a full-width double driveway.
- Existing condition. A cracked slab or undermined base means demo plus re-compaction, adding $1,000 to $2,500.
- Drainage work. A driveway that currently floods the garage needs a channel drain or regrade, which runs $600 to $1,500.
- Material grade. Premium clay brick sits at the top of the range; standard concrete pavers sit near the middle.
- Permit and inspection scope. A county permit and any required inspection add a modest line, but skipping it is the real cost.
Our written estimate is upfront pricing, no surprises: the number you see is the number you pay, and there are no change orders once the base is compacted and signed off. Call (844) 662-2335 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Valinda Homes Specifically Do to This Job
Valinda isn’t an incorporated city. It sits as one of the unincorporated communities of the San Gabriel Valley, governed directly by LA County. That means every paver driveway permit here runs through LA County Public Works and Building & Safety in Alhambra, not a local city hall, and there’s no city inspector next door to lean on when a plan-check detail needs a ruling. Neighboring West Covina handles its own permits; Valinda’s path is different, and a contractor who doesn’t know that will stall your job for weeks.
The housing stock shapes the job too. Many of these mid-century single-story stucco homes along Amar and Valinda Avenue were built in the 1950s through 1970s, and a fair number already carry informal rear additions, garage conversions, or second units built decades ago. If your driveway abuts a structure that was never permitted, we regularly discover it during plan-check and have to help sort out the retroactive paperwork before the new work can pass. Clay-heavy soil under that old stock also means the base has to be engineered for shrink-swell cycles, which is why our base excavation runs deeper than what a fresh-lot build requires.
Serving Valinda, CA – Our Local Coverage Area
We serve Valinda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Valinda

A standard residential paver driveway takes 4 to 5 working days, and a long or complex layout stretches to 7. The base work consumes most of that time; the pavers themselves go down in a couple of days. Call (844) 662-2335 to get a schedule tied to your square footage.
Yes, you will need a permit through LA County Public Works and Building & Safety in Alhambra. Because Valinda is unincorporated, this is a county process, not a city one, and there’s no local inspector to fall back on. We handle the permit filing and coordinate the inspection. Call for a free estimate that spells out the permit line.
Sometimes, but only if the slab is intact and drainage allows. A thin paver overlay adds weight and cuts clearance at the garage threshold, so most Valinda jobs call for removing the old slab and re-building the base. We’ll tell you straight which side of that line your driveway is on. Call for the on-site assessment.
Expect $7,000 to $18,000 for a residential paver driveway here, with the low end for a single-car apron and the top for a long RV pad with borders and drainage. Call (844) 662-2335 for an exact quote; estimates are free and include a written line-item breakdown.
Every paver driveway we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space. If it’s not done right, we make it right. When you pair the driveway work as part of a full Driveway & Pavers in Valinda project, the same guarantee covers the whole scope.
Get Your Free Paver Driveway Estimate in Valinda
We’ll come out, measure the actual pour area, check the base and drainage, and hand you a written line-item estimate in one visit. Call (844) 662-2335 to book a free on-site estimate for paver driveways in Valinda. A live person answers around the clock. We also cover Driveway & Pavers work throughout the area, and our team can pair your driveway project with Door Installation in Valinda or Cabinets & Countertops in Valinda.
Written by the team at Groundwork Construction Co.












