







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Claremont, CA: What the Job Actually Involves
Door installation in Claremont typically runs $650 to $2,800 per door, depending on whether we’re setting a prehung exterior in an existing opening or reframing for a wider slider, and most single-door jobs finish in one visit with trim and hardware done the same day. Two-door exterior packages, French pairs or entry systems that need a new header usually take two to three days. Call (844) 662-2335 and we’ll talk through your opening before anyone comes out. The reason the range is that wide here isn’t the door itself. It’s the century of settling behind the wall.
How our Claremont door installation process works, stage by stage

Claremont’s oldest housing near the colleges was built before standardized door heights, so what looks like a straight swap usually turns into a real carpentry job once we pull the trim. Here’s the sequence we follow.
Stage 1: Measure and open up (about 45 minutes per door). We pull casing and drywall back to the rough opening to see what’s actually holding the frame: old header lumber, shimmed studs, sometimes a door that was reset years ago and never plumbed. You decide at this stage whether we’re keeping the original opening size or widening it. That single decision drives most of the budget.
Stage 2: Frame correction and sill work (two to five hours). Clay soil and decades of movement mean jambs rarely sit square. Our technicians re-shim and, where the opening is out of level by more than a quarter inch, sister in new framing. Exterior doors get a fresh sill pan and flashing detail here so winter rain can’t find its way behind the wall. You don’t have choices to make in this stage. We just fix what’s behind the wall before anything new goes in.
Stage 3: Set the door and hardware (two to four hours). Prehung units go in plumb and square, hinge side first. We hang the slab, set the strike, and check the gap tolerance around the perimeter. For exterior entries you’ll pick the lockset and deadbolt grade now if you haven’t already. We recommend ANSI Grade 2 hardware or better for any door facing the street.
Stage 4: Weather-seal and trim (one to two hours). Thresholds, sweeps, weatherstripping and casing go on. On exterior doors we seal the frame-to-wall joint and back-prime any trim we cut. Interior doors get their casing and a clean return to the existing drywall.
Stage 5: Punch and walkthrough (about 30 minutes). We open and close every door through a full swing, check the latch catch, and show you the finished product. On permitted work we schedule the inspection before we call the job closed, and you get the signed-off paperwork with the invoice.
Most interior replacements in a Claremont ranch or bungalow land on day one. Front entries with rot at the sill or a bowed header run into day two or three. As part of a full Windows & Doors in Claremont scope, we sequence door work with window openings so the exterior wall gets sealed once, not twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll choose between
Once the opening is set, the decisions are yours. Here’s the honest read on each.
- Fiberglass entry doors. The best fit for most Claremont entries. They hold up to the hot, dry summers with no checking or fading, they take a stain that looks like wood, and they cost roughly $1,200 to $2,600 installed as a prehung unit. The trade-off: they feel heavier than steel and a hard strike can chip the outer skin.
- Steel entry doors. Cheapest of the three at the entry level, around $900 to $1,800 installed, with excellent security. In full sun they can get hot enough to be uncomfortable to touch, and dents don’t pull out cleanly.
- Solid wood. The right call for the 1900s Craftsman and Spanish Colonial homes around the colleges where an original door is part of the architecture. Budget $1,800 to $4,500 installed. Wood moves with the seasons and wants refinishing every few years.
- Interior hollow-core vs. solid-core. Hollow-core runs $300 to $700 installed and is fine for closets and secondary rooms. Solid-core, at $600 to $1,400, cuts sound transfer and feels better in a house with kids or a home office.
- Sliding and French configurations. A wider slider or French pair means reframing and a new header, which is where the project jumps. We build prefab modules where the layout allows, and Mighty Buildings panels fit some modern infill plans well when a homeowner is chasing a clean contemporary line.
Brand names matter less than the hardware, the hinge quality and how the unit is set. Andersen entry systems hold up well against our sun, and we’ll talk through the exterior cladding match if that’s what you’re after.
What door installation costs in Claremont, CA

Plan on $300 to $700 for a standard interior door installed, $900 to $2,600 for a prehung exterior entry, and $1,800 to $4,500 for a solid wood or custom entry. Those are the ranges we actually quote in Claremont. Five things push a job from the low end to the high end:
- Opening condition. A square, straight opening is a one-visit job. A bowed header, rot at the sill or a frame that was shimmed badly years ago adds framing time and money.
- Width change. Moving a rough opening means cutting into framing and drywall, patching, and usually a permit. It can add $800 to $2,000 to a single door.
- Material grade. Fiberglass, steel and solid wood sit at very different price points, and the hardware grade adds on top.
- Exterior detailing. Stone veneer, stucco returns or a custom header detail take finish carpenter time.
- Permit scope. Swapping a door in kind usually doesn’t need one. Cutting a new opening or changing structural framing brings in the city, and we pull that permit and pass the inspection for you.
A written line-item quote from us lists the door unit, hardware, framing and trim time, permit and inspection fees, and disposal. It won’t list what we find behind a wall we haven’t opened yet, so on older homes we say plainly that hidden damage is quoted as a change order you approve before anyone touches it. What it does guarantee is the number you sign. That’s upfront pricing, no surprises. If you’re also reworking the room the door leads into, homeowners often pair this with Cabinets & Countertops in Claremont so the finish carpentry happens in one pass.
See the difference
Before
After
Before
After
Before
AfterWhat Claremont’s older homes specifically do to a door job
Most of our Claremont door calls come out of the 91711 ZIP and they’re in older houses: 1920s bungalows and Spanish Revivals near the colleges, mid-century ranches west of Indian Hill, with newer infill scattered around. In those older homes, a door that won’t latch right usually isn’t a bad door. It’s a door that’s settled along with the frame, and the original slab may be 80 years past its service life. The clay soils under this city let foundations move slowly, and that movement racks door openings before it shows anywhere else in the house. The hot, dry summers dry out our wood enough to open a gap you can see daylight through. That drives plenty of our exterior calls toward fiberglass or steel over wood.
Then there’s the tree canopy. Claremont’s status as a City of Trees means a mature urban forest and tree preservation ordinances that touch nearly every project here. The city often requires a permit to remove or even prune large trees, and construction plans have to show protection zones with root barriers. If your door project involves grading near a root zone, we coordinate with an arborist early, because that step can stall a project for weeks when it’s handled late. Our Windows & Doors team handles that sequencing routinely. If you’re in Claremont and considering a garage conversion down the line, homeowners often pair it with Garage Conversion ADU in Claremont, and we’ll plan the door openings with that in mind now rather than reopening the wall later.
Serving Claremont, CA – Our Local Coverage Area
We serve Claremont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Claremont

A single interior door is usually a same-day job, and a standard prehung exterior entry takes about a day from demo to trim. Wider exterior openings, French pairs or doors that need new framing run two to three days, plus whatever time the city wants for a permit inspection. Call (844) 662-2335 and we’ll give you a real timeline after looking at your opening.
A like-for-like replacement in the existing opening generally doesn’t require a permit. Cutting a new opening or changing structural framing does, and so does anything that alters the exterior envelope on a historic property. We check with the city on every job and pull the permit when it’s needed, so the inspection passes and you have the paperwork.
Yes, most door installations touch neither. Interior replacements almost never involve plumbing, and exterior swaps in the same opening don’t move framing. Only a width change or a relocation into a new wall pulls structure into the conversation, and we’ll tell you up front when that’s the case.
Interior doors run $300 to $700 installed, prehung exterior entries $900 to $2,600, and solid wood entries $1,800 to $4,500. The final number depends on opening condition, material and whether we’re widening the frame. Call (844) 662-2335 for an exact quote. Estimates are free.
Every door we install is covered by the 730-Day Done Right Promise. If the workmanship isn’t right, we come back and make it right. Manufacturer coverage on the door and hardware applies separately, and we hand you that paperwork at the final walkthrough.
Get a free on-site door estimate in Claremont
We’ll come measure the opening, tell you what’s behind the trim, and leave you with a written line-item quote the same visit. A live person answers when you call (844) 662-2335, day or night, so there’s no voicemail and no waiting until Monday. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












