







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in West Covina, CA
Custom and geometric windows are made to a specific shape, size, and specification rather than pulled from a standard catalog – arched, round, half-round, trapezoid, octagon, eyebrow, and full custom profiles cut to a template taken from your actual wall opening. Homeowners in West Covina order them for two main reasons: a remodel where the architecture calls for a shape that stock units can’t fill, and a replacement where the original 1950s-to-1970s opening was never a standard dimension to begin with. We handle the template, the order, the lead time, and the install as one job, and our technicians have up to 12 years of experience setting shaped units in San Gabriel Valley homes. Call (844) 662-2335 for a free estimate and design consult, and you’ll reach a live person any hour of the day.
This work sits inside our larger Windows & Doors service, but the shaped-window end of it runs on a different set of rules: longer lead times, real templating, and installers who understand that a half-inch error on a radius shows up as a visible gap or a forced fit. We treat it that way from the first measurement.
Key Takeaways
- Custom and geometric windows are built to a template of your opening, not ordered from a size chart, and typically run 8 to 16 weeks from order to delivery.
- In West Covina, the most common shaped-window calls come from mid-century ranch homes near the Civic Center and from two-story additions where a gable or stairwell needs glazing.
- Expect $900 to $2,800 per shaped unit for the window alone, with install and framing work on top depending on what’s behind the wall.
- Most jobs are measured, templated, and ordered in a single visit; we don’t send a different crew later to re-measure.
- Every installation we perform is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.

When You Need Custom & Geometric Windows
Most homeowners don’t set out looking for a custom window. They find out they need one when a stock unit won’t fit, won’t match, or looks wrong once it’s in the wall. These are the situations we see most in West Covina.
- A stock size won’t fill the opening. Plenty of West Covina homes were built between 1955 and 1975, and window openings in that era were rarely a clean catalog dimension. We’ve measured openings in the neighborhoods around Cameron Park that were 1/4 inch off on each side – enough to make a stock unit either bind or leave a gap that no amount of caulk fixes properly.
- An addition or ADU needs a shaped gable window. When you add square footage with a pitched or gabled roofline, the triangle under the peak is dead wall unless you put glass in it. A trapezoid or triangular unit turns that dead space into light and makes the addition look intentional from the street. This comes up often on ADU and second-story projects across West Covina.
- A stairwell or entry needs a radius or eyebrow window. Arched transoms over an entry door and half-round windows above a landing are the classic geometric moves. They solve a light problem and they read as a deliberate architectural choice rather than a builder basic upgrade.
- The original custom window failed and needs a true match. Shaped units from decades ago often can’t be replaced with anything off the shelf. We template the existing opening and match the profile so the new window sits in the same reveal as the old one, which matters on homes with visible brick or stucco returns.
- You’re matching a specific exterior style. Spanish Colonial, Mid-Century Modern, and Tudor-revival homes all use geometry differently – round tops, angular bays, octagon accents. Getting the shape right is what makes a renovation read as period-correct instead of patched together.
- HOA or design review requires a specific profile. Some West Covina neighborhoods and planned communities have exterior review requirements. A shaped window that matches the approved elevation drawing is often the only way to pass, and we work from the approved plans when they exist.
If you’re weighing replacement against a full opening change, our window replacement in West Covina page walks through the standard-size path, and this page covers the shaped end of it.
Our Custom & Geometric Windows Process
Custom windows fail on measurement and lead time more than anything else. Here’s how we run the job so neither catches you off guard.
- On-site consultation and rough measurement. We come out, look at the wall, the framing, the roofline, and how the window sits relative to the interior. We talk shapes, glass options, and finish before anyone talks price, because the shape drives the cost more than the size does. Free estimate and design consult, no obligation.
- Precise template of the opening. For shaped units, a rough measurement isn’t enough. We build a physical template of the actual opening – every angle, every radius – and the window is manufactured to that template. This is the step that separates a custom window from a “close enough” stock unit, and it’s the step most homeowners never see.
- Brand and specification selection. We order through our curated brand partnerships and specify the glass package to fit West Covina’s climate: the inland San Gabriel Valley summer heat and the glare that comes with west-facing exposures. From the Andersen and Marvin lines we work with, we help you pick the right frame material and glass build for the specific wall, not a one-size default.
- Order placement and lead-time tracking. Shaped windows typically take 8 to 16 weeks from order to delivery, sometimes longer for unusual radii or specialty glass. We place the order, confirm the lead time in writing, and keep you posted so the rest of your construction schedule can plan around it instead of getting held up on the window.
- Delivery inspection and install day. We inspect the unit on arrival before it goes in the wall – corners, frame integrity, glass, hardware. Install day is a full-day job for most shaped units, and for the shaped windows we set, our background-checked, uniformed technicians do the work. You know who’s on your property and when.
- Sealing, flashing, and final walkthrough. Shaped windows have more seams than rectangular ones, and more seams mean more places for water to find a way in during the winter rains the valley does get. We flash and seal the opening properly, check operation and drainage, and walk it with you at the end. If anything’s off, the 730-Day Done Right Promise covers it in writing.
Alongside the shaped work, we handle standard units across the West Covina service area, so a job that mixes a custom arch with a row of standard sliders stays with one contractor from foundation to finish line.

Custom & Geometric Windows Pricing in West Covina
Custom and geometric windows in West Covina typically run $900 to $2,800 per shaped unit for the window itself, with installation and any framing, stucco, or drywall repair added on top. An arched transom over an entry door often lands at the low end; a large trapezoid gable window with specialty glass runs toward the top. There’s no honest way to quote a shaped window sight unseen, which is why the estimate visit and design consult are free.
Here’s a realistic breakdown of where the money goes:
| Line Item | Typical Range (West Covina) |
|---|---|
| Per-unit cost, simple shaped window (half-round, eyebrow) | $900 – $1,500 |
| Per-unit cost, complex shape (trapezoid, octagon, true custom radius) | $1,500 – $2,800 |
| Installation per shaped unit | $350 – $800 |
| Framing modification for a new opening | $400 – $1,200 |
| Stucco, siding, or drywall patching and finish | $300 – $900 |
| Template and design consult | Free |
A single shaped window swap in an existing opening can land in the $1,300 to $2,200 range all-in. A gable window cut into a new addition, with framing and exterior finishing, is a different job and prices accordingly. We give you the full number before work starts and we stick to it: upfront pricing, no surprises.
What drives the cost most:
- Shape complexity. A half-round or eyebrow profile is a simpler build than a true trapezoid or a window with multiple radii. The more angles, the more labor at the factory and the more cost.
- Size. Glass area and frame weight scale the price. A large gable unit costs more than a small accent octagon even at the same shape complexity.
- Frame material and glass package. Premium frame options and low-E or specialty glass raise the unit cost, and they’re worth considering on the west-facing walls that catch the most afternoon sun.
- New opening vs. replacement. Replacing a shaped unit in an existing opening is straightforward. Cutting a new shaped opening into a wall means framing, header work, and exterior finishing, which adds labor.
- Lead time and availability. Some shapes and glass builds take longer, and specialty orders can run beyond the standard window.
On the financing side, we offer 0% financing for 18 months, and projects over $10,000 qualify for $1,000 off. That can make a whole-home window package more reachable than paying cash up front, and it applies the same way on a custom order as on a standard one. Call (844) 662-2335 for a firm quote – estimates are free and there’s no pressure to commit.
Why Custom Window Work in West Covina Is Its Own Animal
West Covina sits in the eastern San Gabriel Valley, where summer heat runs long and the afternoon sun on west-facing walls is brutal. That matters for shaped windows because a single large gable window catches a lot of light. On a shaped unit, the glass area is often bigger than a stock window of the same width, so the glass package choice has more effect on how the room actually feels in August. We spec low-E glass on most shaped units facing west, and we’ll tell you plainly when the cheaper glass is fine on a north or shaded wall.
The housing stock matters too. West Covina built heavily in the mid-century decades, and the windows and openings from that era are inconsistent in ways a manufacturer’s catalog can’t account for. We’ve measured openings around the . . . and found them a full 3/8 inch off from side to side – because that’s how they were built, not because anything failed. A template catches that. A rough measurement doesn’t.
And because shaped windows take weeks to arrive, they change the sequencing of a bigger job. On an addition, the window needs to be ordered early so it’s on site when the framing is ready for it, not sitting in a warehouse while the crew waits. We plan custom window orders into the construction schedule from day one so nothing gets held up on glass.
Materials and Brands We Work With
We order custom and geometric windows through a curated set of brand partners, and we pick from that list based on the wall and the budget, not on what’s easiest to order. The Andersen and Marvin lines we work with include shaped and custom profiles that hold up to the valley’s heat and sun over the long haul, and they’re backed by the manufacturers’ own warranties on top of our 730-Day Done Right Promise. Built to last, backed in writing is how we think about it – the unit has to be right, and the install has to be right, or the guarantee means nothing.
For prefabricated and off-site-built components that sometimes pair with a window order on an addition or ADU – like a small backyard structure or a detached unit – we coordinate with partners including Mighty Buildings and Plant Prefab, so the window package fits the structure rather than getting shoehorned later. For a standalone shed or workshop where a shaped window is a nice-to-have, we’ll point you to a source like Tuff Shed rather than sell you a custom unit you don’t need.
FAQs – Custom & Geometric Windows
How much do custom windows cost in West Covina?
Custom and geometric windows in West Covina typically cost $900 to $2,800 per shaped unit for the window alone, with installation adding roughly $350 to $800 per unit and framing or exterior patching on top. A simple half-round replacement in an existing opening often lands around $1,300 to $2,200 all-in, while a new gable window in an addition with framing and stucco work prices higher. Call (844) 662-2335 for an exact quote – estimates are free.
How long does it take to get custom and geometric windows?
Custom and geometric windows typically take 8 to 16 weeks from order to delivery, and some unusual shapes or specialty glass take longer. We template, order, and track the lead time in writing so the rest of your project can plan around it. If a shaped window is holding up a larger job, we sequence the order early to keep it from stalling the schedule. Call (844) 662-2335 and we’ll give you a realistic timeline for your specific shape.
Can you match the existing shaped windows on my West Covina home?
Yes. For older homes with shaped windows that can’t be replaced from a catalog, we take a physical template of the existing opening and have the new unit built to match the original profile and reveal. This keeps the new window sitting in the same position as the old one, which matters on homes with visible brick or stucco returns. Call (844) 662-2335 to set up a free measurement visit.
Do you install geometric windows in new openings and additions?
Yes. We cut new shaped openings for additions, gable ends, stairwells, and entry transoms, including framing, header work, and exterior finishing. If you’re building an ADU or second-story addition and want glass in a gable or under a peak, a trapezoid or triangular unit is the right move, and we handle the template, order, and install as one job. Each install is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. Call (844) 662-2335 for a free estimate and design consult.
Get Your Custom Window Project Started
Shaped and custom windows reward getting the details right and punish shortcuts – a template that’s a little off, an order placed late, a flashing job that leaks in the first rain. We handle all three, and we do it as one contractor from the first measurement to the final walkthrough, across West Covina and the neighborhoods we serve. Calls are answered by a live person 24 hours a day, seven days a week, and every technician who shows up is background-checked and in uniform. Call (844) 662-2335 for a free estimate and design consult, and we’ll tell you straight what your opening needs and what it’ll cost.
Written by the team at Groundwork Construction Co. of West Covina, serving West Covina.


